More Vintage Tek Gear

Back in October I posted about some old Tektronix equipment I found at work consisting of a function generator and current probe amps sitting in a power supply chassis. Well after a few more months of rummaging around the various labs and store rooms at work I stumbled across another old piece of Tektronix memorabilia, a Type 576 Curve Tracer. As far as I can tell from perusing the web it dates back to the late 1950’s or early 1960’s. One site, Barry Tech, claims the curve tracer is from 1969 while Vintage Tek simply states the 576 was developed sometime between 1960 and the early 70’s when the series was discontinued. The 576 is also the second curve tracer offered by Tekronix designed with transistors instead of tubes, the first being the 575.

[Update: The guys over at Vintage Tek got in touch with me and as it turns out the 576 first appeared in the March 1969 Tektronix catalog.]

Spec Overview from the datasheet found on Valuetronics:

  • Can deliver up to 220W of peak power to the DUT.
  • Voltage steps can be as large as 1500 V and current steps can hit 20A peak. If you purchase the 176 high current plug-in the 576 can hit up to 200A!
  • Absolute accuracy of 2% of total output including settling, or 1% of amplitude setting.
  • Pulse generator capable of 1 to 10 repeated steps.
  • Built in beta and gm calculator to save the designer from pesky arithmetic

The 576 Curve Tracer in all its magnificent glory. Couldn't find a picture of the insides online sadly.

I think I definitely prefer knobs over touchscreens on my test equipment. Fiddling with this guy just felt great. Not that I want to give up my modern gear completely mind you, I'm just sayin'.

Note the force and sense lines for the collector and emitter terminals. Also this thing could dish out some serious power to the DUT, up to 220W!

Looking on Barry Tech I saw they also provided a link to the 576’s manual you can check out here. Tek was kind enough to provide a complete section dedicated to the circuit description that I definitely plan to check out in my free time. The circuit description section includes pieces on the control loop compensation, logic diagrams, timing charts, and at first glance, what appears to be pretty detailed explanations of it all. Check out Figure 3-6 to see a diagram of the discrete A/D used in the tracer designed with only a handful of diodes and resistors. Supporting the DIY movement before it was fashionable, the manual also contains a complete section on basic maintenance and troubleshooting including where to locate various circuits, key performance specs, and a soldering guide.

Unfortunately I don’t think this 576 sees much action anymore at work. To my knowledge nothing in our product catalog needs to be tested using at the individual device level and if it did it would probably be done using a wafer probe station instead. I’ll ask some of the designers and test engineers if it’s ever used anymore and report back.

Advertisements

3 responses to “More Vintage Tek Gear

  • Vintage Tek Gear « Fake EE Quips

    […] to see some more Vintage Tek Gear? Check out my new post on the 576 Curve Tracer. Share this:EmailPrintTwitterFacebookStumbleUpon This entry was posted on Tuesday, October 25th, […]

  • Alan

    Nice find – that’s a real nice piece!

  • Steve

    At work we still use some old curve tracers. Mostly in ESD testing; we will use them to test things like snapback voltages of zener diodes or npns used in ESD structures. There’s a machine very similar to this one in the lab right now.

    Our parts are usually only like 2-5 pins though, so testing all the pin combinations by hand is quick enough.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s